Adhesive Double Wall Printed Heat Shrink Tube
Basic Info.
Type:
Insulation tubeApplication:
Low VoltageColor:
ColoredRated Voltage:
600VTensile Strength:
10.4MpaShrink Ratio:
2:1 to 6:1Operating temperature:
-45~125℃Feature:
Flame RetardantSample Development:
SupportFunction:
Tube ProtectPackage:
Box/SpoolApplication
Wires
Cables
Battery Cables
Sealing Connections
Damaged Chargers
Rope Ends
Connections
Terminals
Components
Electronic
Automotive
Consumer goods
This is a resistant shrink tubing with the internal adhesive layer.
When heat is applied, shrink tubing recovers and the internal adhesive layer melts.
A small fillet of clear adhesive (about 1 mm wide) becomes visible at the end of the heated tubing.
When cooled down, it forms a rigid seal. Heat activated glue strongly adheres to wires, terminals or any other surfaces.
When adhesive flows, it pushes the air out and fills any gaps between the wire and the tubing, which makes the connection resistant.
For best results we recommend using a heat gun.
parameter
| Property | Test Method | Typical Data | ||||
| Operating temperature | UL 224 | 55°℃ to+135*C | ||||
| Tensile strength | ASTM D 2671 | >14 MPa | ||||
| Elongation at break | ASTM D 2671 | 400% | ||||
| Longitudinal shrinkage | UL 224 | 0±5% | ||||
| Eocentricity | ASTM D 2671 | <30% | ||||
| Flammability | VW-1 | Pass | ||||
| Dielgctric strength | EC 243 | >20 KV/mm | ||||
| Volume resistance | EC 93 | 1014 Ω.cm | ||||
| Copper stabilit | UL 224 | Pass | ||||
| Heat aging /Tensile strength /UItimate elongation | 158°C/168h | Unaged/> 12 MPaf>350% | ||||
| Sjze | As Supplied (mm) | After Recovery (mm) | Standard length m/spool |
|||
| Inch(D) | nside Diameter Min.(D) |
Wall Thickness Nominal.(T) |
Inside Diameter Max.(d) |
Wall Thickness nominal.(t) |
||
| 3/64 | 1.2 | 0.18 | 0.6 | 0.30 | 200 | |
| 1/16 | 1.6 | 0.18 | 0.8 | 0.33 | 200 | |
| 3/32 | 2.4 | 0.25 | 1.2 | 0.36 | 200 | |
| 1/8 | 3.2 | 0.25 | 1.6 | 0.44 | 200 | |
| 3/16 | 4.8 | 0.25 | 2.4 | 0.55 | 200 | |
| 1/4 | 6.4 | 0.25 | 3.2 | 0.55 | 200 | |
| 3/8 | 9.5 | 0.30 | 4.8 | 0.55 | 100 | |
| 1/2 | 12.7 | 0.35 | 6.4 | 0.65 | 100 | |
| 5/8 | 16 | 0.35 | 8 | 0.69 | 100 | |
| 3/4 | 19.1 | 0.40 | 9.5 | 0.89 | 100 | |
| 1 | 25.4 | 0.45 | 12.7 | 0.90 | 50 | |
| 1/4 | 32 | 0.45 | 16 | 0.90 | 50 | |
| 11/2 | 38.1 | 0.50 | 19.1 | 1.00 | 50 | |
| 2 | 50.8 | 0.50 | 254 | 1.00 | 25 | |
| 3 | 76.2 | 0.55 | 38.1 | 1.20 | 25 | |
| 4 | 100 | 0.55 | 50.8 | 1.30 | 25 | |
| 5 | 120 | 0.55 | 63 | 1.40 | 25 | |
| 6 | 150 | 0.55 | 75 | 1.40 | 25 | |
| 7 | 180 | 0.55 | 90 | 140 | 25 | |
| Size | As Supplied(mm) | After Recovery(mm) | Standard ength m/spoo |
||
| DM-T125 3X inch.(D) |
Inside Diameter Min.(D) |
Wall Thickness Nominal.(T) |
Inside Diamele Max.(d) |
Wall Thickness Nominal.(C) |
|
| 1/16 | 1.510.5 | 0.15 | 0.5 | 0.45 | 200 |
| 1/8 | 3/1 | 0.18 | 1.0 | 0.55 | 200 |
| 3/16 | 4.5/1.5 | 0.20 | 1.5 | 0.60 | 100 |
| 1/4 | 6/2 | 0.22 | 2 | 0.65 | 100 |
| 3/8 | 9/3 | 0.30 | 3 | 0.75 | 50 |
| 1/2 | 12/4 | 0.35 | 4 | 0.80 | 50 |
| 5/8 | 15/5 | 0.35 | 5 | 0.85 | 50 |
| 3/4 | 18/6 | 0.40 | 6 | 0.89 | 50 |
| 1 | 24/8 | 0.45 | 8 | 1.00 | 25 |
| 11/4 | 30/10 | 0.45 | 10 | 1.15 | 25 |
| 11/2 | 39/13 | 0.50 | 13 | 1.25 | 25 |
| 2 | 50/16 | 0.75 | 16 | 2.3 | 1 |
| 21/2 | 60/20 | 0.80 | 20 | 2.4 | 1 |
| 3 | 70/23 | 0.85 | 23 | 2.4 | 1 |
| 4 | 100/33 | 0.85 | 33 | 2.4 | 1 |
Advantages
Flexible and flame retardant. Free from toxic heavy metaland harmful substances such as PBBS, PBBOS, PBBE'S.
We offer product development by strong technical support background.
The tapes are packed on tubes and roll meters based on customer requirements.
introduction
The key feature of our Adhesive Double Wall Printed Heat Shrink Tube is its double wall construction, which offers enhanced protection against abrasion, moisture, and other environmental factors. The inner layer of the tube is coated with a specially formulated adhesive that creates a strong bond with the underlying surface, ensuring a tight and secure fit. This adhesive also provides additional insulation and protection against water and other contaminants, making it ideal for outdoor and harsh environment applications.
In addition to its functional benefits, our heat shrink tube also features a printed design, allowing for easy identification and organization of wires and cables. The printed markings are highly visible and durable, ensuring long-lasting legibility for quick and efficient identification of connections and circuits.
Our Adhesive Double Wall Printed Heat Shrink Tube is available in a variety of sizes and colors to accommodate different wire gauges and color-coding requirements. Whether you need to insulate, protect, or organize wires and cables in industrial, automotive, or household applications, our heat shrink tube is the ideal solution.
With its high-quality materials and reliable performance, our Adhesive Double Wall Printed Heat Shrink Tube is a cost-effective and efficient solution for all your insulation and organization needs. Trust in our product to provide durable and long-lasting protection for your wiring and cabling systems.
Choose our Adhesive Double Wall Printed Heat Shrink Tube for a dependable and versatile solution that meets the highest standards of quality and performance. Experience the convenience and reliability of our heat shrink tube for all your wire and cable management needs.