0102030405
3:1 Ratio Adhesive Marine Grade Heat Shrink Tube
Basic Info.
Working temperature:
-55°C~+105°CBreakdown strength:
ASTM D2671 =15KV/mmTensile strength:
ASTM D2671 =10.4MPa WaterproofFeature :
Prevent Dust, Solvents, And Other Foreign MaterialsSample Development:
SupportFunction:
Tube ProtectPackage:
Box/SpoolApplication
Automotive industries
Electronics industries
Power stations
Cable and wire industries
Audio and video
power distribution
Strain relief
wire marking
mechanical protection
3:1 Ratio Adhesive Marine Grade Heat Shrink Tube
The durable dual wall tubing material offers exceptional wear protection and resistant to fluids and chemicals.
A layer of glue on the inside of the heat shrink tube, when heated will liquefy to create an air-tight seal for long-lasting insulation. The outer wall of the heat shrink tubing provides enhanced protection from wear and tear. The inner wall creates a consistently waterproof seal and excellent strain relief. Industrial marine grade tubing is resistant to fluids, heat, and mechanical stretch.
Simply slide heat shrink tube over your connection point and apply heat. Make professional insulated connections in seconds. (Shrink temperature: 80 to 125°C). You can conveniently cut the heat shrink tubing rolls to any length you want, and the 6 heat shrink tubing diameters can be applied to different projects.
The waterproof heat shrink tubing can be used in marine and automotive wiring, model building, and DIY electrical wiring projects. The application areas are very diverse, such as electrical insulation/environmental sealing to protect against moisture, fuel and chemicals/protection of surfaces against abrasion, peeling and denting.
Advantages
Dual Walled with Strong adhesive(Glue Inside) systems provide adhesives.Cool,harden and reach their bond strength within seconds.
High-quality dual walled with strong adhesive(Glue Inside) adds extra moisture resistance and strength.
When heat is applied, shrink tubing recovers and the internal adhesive layer melts. A small fillet of clear adhesive (about 1 mm wide) becomes visible at the end of the heated tubing. When cooled down it forms a rigid seal. Heat activated glue strongly adheres to wires or any other surface.