Dual Wall Adhesive-Lined Heat Shrink Tubing for Automotive Oil-pipe Protection
Basic Info
Basic Info.
2:1 shrink ratio
Semi-rigid outer jacket for mechanical damage prevention
Adhesive inner layer for sealing against moisture and corrosion
Easy installation
High strength bonding, the adhesive layer is hard to be peeled off from pipeline
Continuous operating temperature:-45℃-105℃
Fully shrink temperature:≥125℃
Application:
Automotive Oil-pipe Protection
Preventive protection to break line
Fuel line
Hydraulic line and other metal pipeline
Technical Data
| Property | Test Method | Standard Performance |
|---|---|---|
| Tensile Strength(MPa) | ASTM D2671 | ≥12 |
| Elongation(%) | ASTM D2671 | ≥300 |
| Longitudinal change | ASTM D2671 | -10%~+10% |
| Tensile strength after aging(MPa) | 120℃X24h | ≥12 |
| Non-deformability | 140℃,10min,2kg/cm2,loaded 5min | ≤60% |
| Low-temperature impact | ASTM D 746 | -35℃,no cracking |
| Impact resistance to fall | Room temperature&-40℃X30min,impacted by a weight of 200g, 0.5m high | no cracking |
| Stress-crack resistance | ASTM D 1693 | no cracking |
| Chemical reagents resistance: 0.1mol/L H2SO4,0.1mol/L NaOH,Brake fluid, Engine oil, Gasoline |
No abnormal in appearance | 20℃,120hr |
Adhesive
| Property | Test Method | Standard |
|---|---|---|
| Water Absorption | ASTM D570 | <0.5% |
| Sofening Point(°C) | ASTM E28 | 105±5 |
| Strength of peeling(PE) | ASTM D 1000 | 120N/25mm |
| Strength of peeling(AL) | ASTM D 1000 | 80N/25mm |
| Size mm |
Expanded Inner Diameter Min(mm) |
After Recovery | Standard Package Spool Length M/spool |
||
|---|---|---|---|---|---|
| Inner Diameter Max(mm) | Total Wall Thickness Nom(mm) | Adhesive Thickness Nom(mm) | |||
| Φ6.0 | 6 | 4.5 | 1.20±0.20 | 0.20±0.05 | 300 |
| Φ8.0 | 8 | 6.1 | 1.30±0.20 | 0.20±0.05 | 200 |
| Φ11.0 | 11 | 7.1 | 1.30±0.20 | 0.20±0.05 | 200 |
| Φ13.0 | 13 | 9.8 | 1.30±0.20 | 0.20±0.05 | 100 |
| Φ15.0 | 15 | 11.5 | 1.30±0.20 | 0.20±0.05 | 100 |
Advantages:
Adhesive-lined Heat shrink Tubing is specially designed for Automotive Oil-pipe Protection, providing preventive protection to break line, fuel line, hydraulic line and other metal pipeline which is subject to bending or clamping during manufacturing, installation or operation.