Products Categories

Rubber hose vulcanization wrapping tape

Assorted Gourd Shaped Pin Safety Pins

Self-locking hand-controlled descent gear

High Strength Polyester Industrial Webbing Buckle for Sling Strap

Fall protection 29KN polyester webbing for body harness

Abrasion Resistant Polyester Webbing for Helmet

Abrasion Resistant UHMWPE Webbing

High Strength Polyester Webbing for Sling

0102030405

EPDM Rubber Silicone Cold Shrinkable Tubing Insulation

Material EPDM Rubber/ Silicone
Application Sealing 9-35mm connection
Constant radial pressure and seal without adhesive

product details

Basic Info.

Type:

No tools or heat required

Tensile Strength：

9.8 Mpa

Elongation At Break:

720%

Tear Strength:

27 KN/mm

Dielectric Strength:

14.3KV/mm

Dielectric Constants:

5.0

Sample Development:

Support

Function:

Tube Protect

Package:

Box/Spool

Application

telecommunication ( especially base station )

antenna jumper cable installation

electrical installation

cable repair

mechanical protection

moisture barriers

Cable jacket and sheath repairs

Corrosion protection for fittings and couplings

remote radio unit connections.

Cold shrink wrap is a specially formulated tubular rubber sleeve pre-expanded on a removable plastic cylinder for easy installation. It does not require heat to shrink, you just need to pull the plastic cord, and then the silicone rubber tubing will shrink rapidly and grip around the cable tightly, which will provide a reliable, long-term sealing and protection to the connector.

The installation of antenna feeder system, it protects the joints of jumper wires and antenna or RRU terminal against chemical corrosion and mechanical forces.

The different diameter sizes can cover range of 1000 volt cables, cooper and Aluminum conductors.

parameter

Advantages

cold shrink tubes are open-ended, tubular rubber sleeves that are factory expanded and assembled onto a removable core. Cold shrink tubes are supplied for field installation in this pre-stretched condition. The core of cold shrink tube is removed after the tube has been positioned for installation over an inline connection, terminal lug or other similar applications, allowing the tube to shrink and form a waterproof seal. cold shrink tubes are cold applied. Cold shrink tube applications enable quicker, easier and safer isolation when compared to heat shrink tubes. Cold shrink tubes are also ideal solution where hot work permits are difficult to obtain.