Flame Retardant Adhesive-Lined Heavy Wall Cross-linked Polyolefin Heat Shrink Tubing
Basic Info
Basic Info.
3:1 shrink ratio
Flame retardant
Tubing will not split or rupture during installation, when overheated
Thermoplastic adhesive liner for complete environmental protection and insulation
Continuous operating temperature:-45℃-125℃
Fully shrink temperature: 125℃
Application:
automotive and marine wire harness
wire splices
breakouts
and connector-to-cable transitions
| Property | Test method | Standard | Typical Performance |
|---|---|---|---|
| Tensile strength(MPa) | ASTMD 2671 | ≥10.4 | 11.25 |
| Elongation(%) | ASTMD 2671 | ≥200 | 423.87 |
| Tensile strength after aging(MPa) | UL224 158℃×168hr | ≥7.3 | 10.35 |
| Elongation after aging (%) | UL224 158℃×168hr | ≥100 | 390.69 |
| Dielectric strength(kV/mm) | IEC 60243 | ≥15 | 21.31 |
| Volume resistivity(Ω.cm) | IEC 60093 | ≥1×1014 | 2.57×1014 |
| Property | Test method | Standard Performance |
|---|---|---|
| Water Absorption | ASTM D570 | <0.2% |
| Softening Point(°C) | ASTM E28 | 95±5 |
| Strength of pearing (PE) | ASTM D 1000 | 120N/25mm |
| Strength of pearing (AL) | ASTM D 1000 | 80N/25mm |
| Size mm |
Expanded Inner Diameter Min(mm) |
After Recovery | Standard Package M/pc |
|||
|---|---|---|---|---|---|---|
| Inner Diameter Max(mm) | Jacket Thickness mm | Adhesive Thickness mm | Total Wall Thickness mm | |||
| 9.0/3.0 | 9.0 | 3.0 | 2.00±0.35 | 0.45±0.20 | 2.45±0.35 | 1.22 |
| 13.0/4.0 | 13.0 | 4.0 | 2.30±0.35 | 0.45±0.20 | 2.80±0.35 | 1.22 |
| 20.0/6.0 | 20.0 | 6.0 | 2.30±0.35 | 0.60±0.20 | 2.90±0.35 | 1.22 |
| 28.0/9.0 | 28.0 | 9.0 | 2.30±0.35 | 0.70±0.20 | 3.00±0.40 | 1.22 |
| 33.0/10.2 | 33.0 | 10.2 | 2.80±0.35 | 0.70±0.20 | 3.60±0.40 | 1.22 |
| 38.1/12.0 | 38.1 | 12.0 | 3.10±0.35 | 0.70±0.20 | 3.85±0.50 | 1.22 |
| 43.2/12.7 | 43.2 | 12.0 | 3.50±0.35 | 0.70±0.20 | 4.20±0.50 | 1.22 |
| 51.0/16.0 | 55.0 | 16.0 | 3.85±0.40 | 0.70±0.20 | 4.50±0.50 | 1.22 |
| 70.0/21.0 | 75.0 | 22.0 | 3.65±0.40 | 0.70±0.20 | 4.40±0.50 | 1.22 |
| 85.0/25.0 | 85.0 | 25.0 | 3.65±0.40 | 0.70±0.20 | 4.40±0.50 | 1.22 |
| 105.0/30.0 | 105.0 | 30.0 | 3.85±0.40 | 0.70±0.20 | 4.50±0.50 | 1.22 |
| 120.0/36.0 | 120.0 | 36.0 | 3.85±0.40 | 0.70±0.20 | 4.50±0.50 | 1.22 |
| 130.0/36.0 | 130.0 | 36.0 | 3.85±0.40 | 0.70±0.20 | 4.50±0.50 | 1.22 |
| 140.0/42.0 | 140.0 | 42.0 | 3.85±0.40 | 0.70±0.20 | 4.50±0.50 | 1.22 |
Advantages:
Adhesive-lined heavy wall heat shrink tubing insulates and protects electrical splice and terminations where maximum flame retardancy and exceptional insulating and sealing characteristics are required.
|