PE PVDF FEP PTFE Heat Shrinkable Tube
Basic Info.
Type:
PInsulation tubeApplication:
Low VoltageColor:
ColoredRated Voltage:
600VTensile Strength：
10.4MpaShrink Ratio:
2:1 to 6:1Operating temperature：
-45~125℃Features:
Flame RetardantSample Development:
SupportFunction:
Tube ProtectPackage:
Box/SpoolApplication
wires
cables
Battery Cables
Sealing Connections
Damaged Chargers
Rope Ends
connections
terminals
components
electronic
automotive
consumer goods
When heat is applied, shrink tubing recovers and the internal adhesive layer melts.
A small fillet of clear adhesive (about 1 mm wide) becomes visible at the end of the heated tubing.
When cooled down, it forms a rigid seal. Heat activated glue strongly adheres to wires, terminals or any other surfaces.
When adhesive flows, it pushes the air out and fills any gaps between the wire and the tubing, which makes the connection resistant.
For best results we recommend using a heat gun.
parameter
Advantages
High adhesion, high strength, high density, with rubber into one part.
We offer product development by strong technical support background.
The tapes are packed on tubes and roll meters based on customer requirements.
